Install the software
1.
Close all programs on the computer.
2.
Install the software from the CD.
3.
Follow the on-screen instructions.
4.
When prompted, select the Connect through a wired network option.
5.
From the list of available products, select the one that has the correct IP address. If the product is
not listed, manually enter the product's IP Address, Host Name, or Hardware Address.
6.
At the end of the installation, click the Finish button, or click the More Options button to install
more software or configure basic digital sending features for the product.
7.
Print a page from any program to make sure that the software is correctly installed.
20
Chapter 2 Connect the product and install software
ENWW
Connect the product to a computer by using a USB
cable and install the software (Mac OS X)
This product supports a USB 2.0 connection. Use an A-to-B type USB cable. HP recommends using a
cable that is no longer than 2 m (6.5 ft).
1.
Connect the USB cable to the product and the computer.
2.
Install the software from the CD.
3.
Click the product icon, and follow the on-screen instructions.
4.
Click the Close button.
5.
Print a page from any program to make sure that the software is correctly installed.
ENWW