Configure general fax send settings
1.
From the Home screen on the product control panel, scroll to and touch the
Administration
button.
2.
Open the following menus:
●
Fax Settings
●
Fax Send Settings
●
Fax Send Setup
●
General Fax Send Settings
Configure any of the following settings:
Menu item
Description
Fax Number Confirmation
When the
Fax Number Confirmation
feature is enabled, the fax number must be
entered twice to ensure that it was entered correctly. The feature is disabled by
default.
PC Fax Send
Use the
PC Fax Send
feature to send faxes from a PC. This feature is enabled by
default.
Fax Header
Use the
Fax Header
feature to control whether the header is appended to the top,
and content is shifted down, or if the header is overlayed on top of the previous
header.
JBIG Compression
Enabling the
JBIG Compression
featue can reduce phone-call charges by reducing
fax transmission time and might be the preferred setting. However, using the
JBIG
Compression
feature might cause compatibility problems when communicating with
some older fax machines, in which case you might need to disable it.
NOTE:
The
JBIG Compression
feature works only when both the sending and
receiving machines have this setting.
Error Correction Mode
Normally, the fax accessory monitors the signals on the telephone line while it is
sending or receiving a fax. If the fax accessory detects an error during the
transmission and the
Error Correction Mode
setting is on, the fax accessory can
request that the error portion of the fax be sent again.
The
Error Correction Mode
feature is enabled by default. You should turn it off only
if you are having trouble sending or receiving a fax and if you are willing to accept
the errors in the transmission and a probable quality reduction in the image.
Turning off the setting might be useful when you are trying to send a fax overseas or
receive one from overseas, or if you are using a satellite telephone connection.
NOTE:
Some VoIP providers might suggest turning off the
Error Correction Mode
setting. However, this is not usually necessary.
ENWW
Configure general fax send settings
185