Load the 500-sheet trays
1.
Open the tray.
NOTE:
Do not open the tray while it is in
use.
2.
Adjust the paper-length and paper-width
guides by squeezing the adjustment latches
and sliding the guides to the size of the paper
being used.
3.
Load paper into the tray. Check the paper to
verify the guides lightly touch the stack, but do
not bend it.
NOTE:
To prevent jams, do not overfill the
tray. Be sure that the top of the stack is below
the tray full indicator.
46
Chapter 3 Input trays and output bins
ENWW
4.
Close the tray.
5.
The control panel shows the tray’s paper type
and size. If the configuration is not correct,
follow the instructions on the control panel to
change the size or type.
6.
For custom-size paper, you need to specify the
X and Y dimensions for the paper when the
prompt displays on the product control panel.
Y
X