Clear jams in the right door
The fuser can be hot while the product is in use.
Open the right door.
Gently pull the paper out of the pickup area.
If paper is visible entering the bottom of the
fuser, gently pull downward to remove it.
Do not touch the transfer roller
(callout 1). Contaminants on the roller can
affect print quality.
Paper could be jammed inside the fuser where
it would not be visible. Grasp the blue handles
on both sides of the fuser, and pull the fuser
straight out of the product.
Even if the body of the fuser
has cooled, the rollers that are inside could still
be hot. Do not touch the fuser rollers until they
Pull forward on the green tab to open the fuser
jam-access door. If paper is jammed inside the
fuser, pull the paper straight up to remove it.
Chapter 10 Solve problems
Align the fuser with the slots in the product,
and push it straight in until it clicks into place.
Close the right door.